The important thing that you must know about

There are many kinds of golf clubs and they have different fuctions, which is the important thing that a golfer must know about. So let's have a look.
First onw is Woods. Woods are long-distance clubs, meant to drive the ball a great distance down the fairway towards the hole. They generally have a large head and a long shaft for maximum club speed. Historically woods were made from Persimmon wood although some manufacturers - notably Ping - developed laminated woods.
Second one is Irons. Irons are golf clubs with a flat angled face and a shorter shaft than a wood, designed for shots approaching the green or from more difficult lies such as the rough, through or over trees, or the base of hills. As with woods, "irons" get their name because they were originally made from forged iron. High-loft irons are called wedges. The higher the number gets on the scale, the lower amount of angle difference from 90 degrees. Irons are often hybrid, cavity-back or muscle-back. A hybrid is any iron that features a head very similar to a fairway wood; hollow steel or titanium with a shallow, slightly convex face. A hybrid head is usually marginally shallower and does not extend backwards from the face as far as a comparable fairway wood.
Third onw is Wedges. Wedges are irons with a higher loft than a 9 iron, which is typically lofted at about 42 degrees. Wedges are used for a variety of short-distance, high-altitude, high-accuracy shots such as hitting the ball onto the green ("approach" shots), placing the ball accurately on the fairway for a better shot at the green ("lay-up" shots), or hitting the ball out of hazards or rough onto the green (chipping). There are usually six types of wedges with lofts ranging from 45° to 64°: pitching wedge (PW 48°), gap wedge (GW 52°), sand wedge (SW 56°), lob wedge (LW 60°), and ultra lob wedge (LW 64°)[1]. The pitching wedge is sometimes called or labeled as a 10 iron, and the gap wedge is sometimes called an approach wedge or Utility Wedge and labeled with AW or UW respectively.
Next is Hybrids. Hybrids are a cross between a wood and an iron, giving these clubs the wood's long distance with the iron's familiar swing. These clubs generally are used instead of high-numbered woods and/or low-numbered irons, though some manufacturers produce entire sets of hybrids or "iron replacements" that incorporate hybrid design to add distance and forgiveness to a player's entire set of irons from 1 to pitching wedge. Most hybrids take the place of an iron, but the hybrid is easier to hit than its respective iron.
Then Putters. Putters are a special class of clubs with a loft not exceeding ten degrees (except chippers), designed primarily to roll the ball along the grass, generally from a point on the putting green towards the cup. Contrary to popular belief, putters do have a loft (often 5 degrees from truly perpendicular at impact) that helps to lift the ball from any indentation it has made.
Last is Chippers Another variation of the putter, called the chipper, has a similar look, feel and general construction as a "normal" putter, but with a much higher loft, often 30-45 degrees. It is used to lift the ball over or out of the rough or fringe and onto the green with a motion similar to a putt. It can also be used for "lagging" (a putt made on the green from long distance for the sole purpose of setting up the ball for an easier second putt).
If you are a golfer or want to be a golfer, please hurry to join us and you will be surprised at websites below:

golf equipmnet

golf discount